1.The main feature of them is their bearing capacity. What kind of camera you use with the stabilizer leads to which stabilizer you choose.
*S-40c & S-40a: about 0.2~1.5kg /0.5lbs~3lbs
*S-60c & S-60a: about 1~3kg./2lbs~6lbs
2.Body weight: Because of different material of them, carbon fiber version stabilizer (S-40c and S-60c)is lighter than aluminum ones.More details in specification form attached below.
Some people like the Carbon Fiber Stabilizers because they are light in weight and easy to hold in a long time.While others like the Aluminum one for a little more stable in the high wind for outdoors events.
So first of all, you need to check the capacity range of the stabilizers and measure the weights of camera and lens you use. And then just make decision to choose one you prefer.
That’s all. If you have any question or suggestion, please comment below or DM us on Facebook.
If you are looking for an inexpensive stabilizer that works well out of the box with relatively few adjustments, I think you'll be happy with this one. This stabilizer is built for lighter cameras (max weight that it can handle is 3 pounds) - I found it to be a good match for my Sony A7R and Sony 16-35mm lens. That camera/lens combo put me right at the edge of what the stabilizer can handle at 2.6 pounds, but it worked.
The build of Imorden's S-40A is quite good - it feels solid and everything works very smoothly. The quick release plate is a nice addition and all adjustments are quickly and easily made.
Last year I bought a stabilizer from another company and I could never quite get the balance right. It was a different style of stabilizer, so that might have something to do with my struggles, but I spent a good hour adjusting, re-adjusting, adjusting some more. Eventually I got it to where it was "good enough" but I wasn't really happy with it and it seemed to get knocked out of adjustment very easily. With this stabilizer I spent about fifteen minutes with it and I was ready to go. That honestly surprised me.
I cover most of the following in the video I uploaded, but in case you don't want to watch it, here's basically what I cover:
If you are using the camera with something like a Sony A7R and a zoom lens, make sure you select the focal length of the zoom lens, remove your lens cap and adjust the rear LCD to your liking before you start dialing in the stabilization settings - all of those aspects play into the weight differential. Also (if you are using a Sony) definitely remember to take full advantage of the camera's built in level! It'll tell you immediately if the camera is level or not.
The biggest tip I've learned when using a stabilizer is to use two hands. One hand obviously on the grip, but another hand as a "guide hand." I just use my index finger, middle finger and thumb and gently squeeze just above the gimble to "guide" the camera as I'm moving. If you try to use the stabilizer without doing this, your camera is going to spin around freely at some point and you'll just end up frustrated.
The only thing I might change with this stabilizer would be adding a quick release plate on top of the existing quick release plate. That sounds weird, but I'd like to be able to dial in the exact location of the plate that works for me, then just leave it there (I know I could just mark the position off, but I think you get my point). The way the stabilizer is now, I need to remove the plate if I just want the camera by itself, which means I need to readjust the plate's position each time I put it back on. So maybe another quick release plate on top of the existing quick release plate could resolve this issue as long as it didn't adversely affect the counter balance. I need to buy one to find out.
Overall, I highly recommend this stabilizer if your camera is light enough for it. Good bang for your buck!
Camera Stabilizers Reviewed In This Wiki: Leapcama Rig AW Mount Neewer Pro Opteka X-Grip Roxant Pro Morros Spider Rig Glidecam XR-2000 Imorden S-60C Movo Photo VH300 Camtree Galaxy By ezvid
